CENTER AIRBAG SENSOR ASSEMBLY > REMOVAL

1. PRECAUTION

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE FRONT SEAT ASSEMBLY

4. REMOVE CONSOLE PANEL UPPER FRONT

5. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER

6. REMOVE FRONT DOOR SCUFF LH PLATE

7. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER

8. REMOVE FRONT DOOR SCUFF RH PLATE

9. REMOVE FRONT DOOR OPENING TRIM RH WEATHERSTRIP

10. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

11. REMOVE INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY

12. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

13. REMOVE FLOOR CARPET COVER CENTER LH

14. REMOVE FLOOR CARPET COVER CENTER RH

15. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER

16. REMOVE CONSOLE BOX HOLE COVER

17. REMOVE CONSOLE BOX NO.2 HOLE COVER

18. REMOVE REAR CONSOLE BOX

19. REMOVE CONSOLE BOX NO.1 DUCT

20. REMOVE CONSOLE COVER LOWER

21. REMOVE AIR DUCT REAR NO.2

22. REMOVE AIR DUCT REAR NO.1

23. REMOVE CENTER AIRBAG SENSOR ASSEMBLY