FUEL INJECTOR > REMOVAL

1. REMOVE ENGINE ROOM SIDE LH COVER

2. REMOVE ENGINE ROOM COVER SIDE

3. DISCHARGE FUEL SYSTEM PRESSURE

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

5. DRAIN COOLANT

6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

8. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

9. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

10. REMOVE COWL TOP PANEL SUB-ASSEMBLY OUTER

11. REMOVE COOL AIR INTAKE DUCT SEAL

12. REMOVE AIR CLEANER CAP W/ INLET

13. REMOVE AIR CLEANER CASE W/ RESONATOR

14. REMOVE EMISSION CONTROL VALVE SET

15. REMOVE INTAKE AIR SURGE TANK

16. SEPARATE FUEL PIPE SUB-ASSEMBLY NO.1

17. REMOVE FUEL INJECTOR ASSEMBLY