ELECTRONICALLY CONTROLLED BRAKE SYSTEM > TEST MODE PROCEDURE

1. WARNING LIGHT AND INDICATOR LIGHT BULB CHECK

2. SENSOR SIGNAL CHECK BY TEST MODE (SIGNAL CHECK) (WHEN USING INTELLIGENT TESTER):

3. DECELERATION SENSOR CHECK (WHEN USING INTELLIGENT TESTER):

4. MASTER CYLINDER PRESSURE SENSOR CHECK (WHEN USING INTELLIGENT TESTER):

5. SPEED SENSOR CHECK (WHEN USING INTELLIGENT TESTER):

6. YAW RATE SENSOR CHECK (WHEN USING INTELLIGENT TESTER):

7. END OF SENSOR CHECK (WHEN USING INTELLIGENT TESTER):

8. READ DTC OF SIGNAL CHECK FUNCTION (WHEN USING INTELLIGENT TESTER):

9. DTC OF TEST MODE FUNCTION (SIGNAL CHECK) (WHEN USING INTELLIGENT TESTER):

10. SENSOR SIGNAL CHECK BY TEST MODE (SIGNAL CHECK) (WHEN USING SST CHECK WIRE):

11. DECELERATION SENSOR CHECK (WHEN USING SST CHECK WIRE):

12. MASTER CYLINDER PRESSURE SENSOR CHECK (WHEN USING SST CHECK WIRE):

13. SPEED SENSOR CHECK (WHEN USING SST CHECK WIRE):

14. YAW RATE SENSOR CHECK (WHEN USING SST CHECK WIRE):

15. END OF SENSOR CHECK (WHEN USING SST CHECK WIRE):

16. READ DTC OF SIGNAL CHECK FUNCTION (WHEN USING SST CHECK WIRE):

17. DTC OF TEST MODE FUNCTION (SIGNAL CHECK) (WHEN USING SST CHECK WIRE):