HEADLIGHT DIMMER SWITCH > INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH

2. INSTALL WIPER SWITCH

3. INSTALL SPIRAL CABLE

4. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)

5. INSTALL STEERING COLUMN COVER (for Manual Tilt)

6. ADJUST SPIRAL CABLE

7. INSTALL STEERING WHEEL ASSEMBLY

8. INSPECT STEERING WHEEL CENTER POINT

9. INSTALL STEERING PAD ASSEMBLY

10. INSTALL STEERING WHEEL NO.2 COVER LOWER

11. INSTALL STEERING WHEEL NO.3 COVER LOWER

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

13. INSPECT STEERING PAD ASSEMBLY

14. PERFORM INITIALIZATION

15. INSPECT SUPPLEMENTAL RESTRAINT SYSTEM WARNING LIGHT