WIRELESS DOOR LOCK CONTROL SYSTEM > Only Wireless Control Function is Inoperative

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK WIRELESS DOOR LOCK CONTROL FUNCTION

CHECK DOOR CONTROL TRANSMITTER (LED)

CHECK WIRELESS DOOR LOCK CONTROL FUNCTION (NORMAL OPERATION)

SWITCH TO SELF-DIAGNOSTIC MODE

CHECK BY SELF-DIAGNOSTIC MODE

REGISTER RECOGNITION CODE

CHECK TRANSMITTER BATTERY

CHECK RESPONSE OF DOOR CONTROL RECEIVER

CONFIRM INPUT METHOD FOR SELF-DIAGNOSTIC MODE

READ VALUE OF INTELLIGENT TESTER (UNLOCK WARNING SWITCH)

INSPECT UNLOCK WARNING SWITCH

CHECK HARNESS AND CONNECTOR (MULTIPLEX NETWORK BODY ECU TO UNLOCK WARNING SWITCH)

INSPECT DOOR CONTROL RECEIVER (+B TERMINAL)

INSPECT DOOR CONTROL RECEIVER (E TERMINAL)

CHECK HARNESS AND CONNECTOR (MULTIPLEX NETWORK BODY ECU TO DOOR CONTROL RECEIVER)

REPLACE DOOR CONTROL RECEIVER WITH NORMAL ONE