FUEL PUMP > INSTALLATION

1. INSTALL FUEL PRESSURE W/ JET PUMP REGULATOR ASSEMBLY

2. INSTALL FUEL PUMP AND FUEL FILTER ASSEMBLY

3. INSTALL FUEL PUMP CUSHION RUBBER

4. INSTALL FUEL SUCTION SUPPORT NO.2

5. INSTALL FUEL PUMP HARNESS

6. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY

7. INSTALL FUEL SENDER GAUGE ASSEMBLY

8. INSTALL FUEL PUMP AND GAUGE WITH SUCTION TUBE

9. INSTALL FUEL TANK ASSEMBLY

10. CONNECT FUEL TANK TO FILLER PIPE HOSE

11. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

12. CONNECT FUEL TANK TO CANISTER TUBE SUB-ASSEMBLY

13. INSTALL CHARCOAL CANISTER PROTECTOR

14. CONNECT FUEL TANK WIRE

15. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3

16. INSTALL FUEL TANK PROTECTOR SUB-ASSEMBLY NO.1

17. INSTALL FRONT FLOOR HEAT INSULATOR NO.3

18. INSTALL EXHAUST PIPE ASSEMBLY CENTER

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

20. CHECK FOR FUEL LEAKS

21. CHECK FOR EXHAUST GAS LEAKS

22. PERFORM INITIALIZATION