INSTRUMENT PANEL SAFETY PAD > REMOVAL

1. TABLE OF BOLT, SCREW AND NUT

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

4. REMOVE CONSOLE PANEL UPPER FRONT

5. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER

6. REMOVE RADIO RECEIVER

7. REMOVE CENTER CLUSTER INTEGRATION SWITCH (w/o Navigation System)

8. REMOVE MULTI-DISPLAY (w/ Navigation System)

9. REMOVE STEERING WHEEL NO.2 COVER LOWER

10. REMOVE STEERING WHEEL NO.3 COVER LOWER

11. REMOVE STEERING PAD

12. REMOVE STEERING WHEEL ASSEMBLY

13. REMOVE STEERING COLUMN COVER

14. REMOVE TILT AND TELESCOPIC SWITCH (w/ Power Tilt and Power Telescopic)

15. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

16. REMOVE FRONT DOOR SCUFF PLATE LH

17. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

18. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER

19. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

20. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

21. REMOVE COMBINATION METER ASSEMBLY

22. REMOVE FRONT DOOR SCUFF PLATE RH

23. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

24. REMOVE INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY

25. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

26. REMOVE FLOOR CARPET COVER CENTER LH

27. REMOVE FLOOR CARPET COVER CENTER RH

28. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER

29. REMOVE FRONT PILLAR GARNISH LH

30. REMOVE FRONT PILLAR GARNISH RH

31. REMOVE INSTRUMENT PANEL FINISH PLATE

32. REMOVE INSTRUMENT PANEL NO.1 REGISTER ASSEMBLY

33. REMOVE INSTRUMENT PANEL NO.1 REGISTER ASSEMBLY LOWER

34. REMOVE INSTRUMENT PANEL ASSEMBLY