STEERING SENSOR > REMOVAL

1. PRECAUTION

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE STEERING WHEEL NO.2 COVER LOWER

4. REMOVE STEERING WHEEL NO.3 COVER LOWER

5. REMOVE STEERING PAD

6. REMOVE STEERING WHEEL ASSEMBLY (for Manual Tilt)

7. REMOVE STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic)

8. REMOVE STEERING COLUMN COVER (for Manual Tilt)

9. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic)

10. REMOVE SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR

11. REMOVE STEERING ANGLE SENSOR