REAR BRAKE > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. DRAIN BRAKE FLUID


3. DISCONNECT REAR FLEXIBLE HOSE

  1. Remove the union bolt and the gasket from the rear disc brake cylinder assembly, then disconnect the flexible hose.



4. REMOVE REAR DISC BRAKE CYLINDER SLIDE PIN NO.2


    G021633

  1. Remove the rear disc brake cylinder slide pin No.2.



5. REMOVE REAR DISC BRAKE CYLINDER SLIDE PIN NO.1

  1. Remove the rear disc brake cylinder slide pin No.1.



6. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY


    F045897

  1. Remove the rear disc brake cylinder assembly.