WIPER AND WASHER SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items of the customer's request is applicable or not for the customized items, perform the customize operation.
  2. Be sure to record the current value before customizing.
  3. In case of performing the troubleshooting, pay attention as there is a possibility that the function is OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function", check that the wireless operation is not OFF by customizing, then perform the troubleshooting.)


WIPER 
Display (Item)
Default
Contents
Setting
SPEED MODE (Speed mode)
Avail
Function to change to the intermittent operation when the vehicle comes to a stop ( 0 vehicle speed) from running condition in case that the wiper switch is at the LO position.
NOT AVAIL / AVAIL
AUTO WIPER (Auto wiper)
Avail
Function to operate the wiper automatically when it is raining.
NOT AVAIL / AVAIL
REWIPE CONTROL (Rewipe control)
SPD MOD
Function to change time until operating the wiper to prevent dropping after having used the washer.
OFF / 3 s / SPD MOD