CRUISE CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK


    E109221E07

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on.

  3. Read the DTCs by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


DTC CLEAR

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on.

  3. Operate the intelligent tester to erase the codes.

    HINT:
    Refer to the intelligent tester operator's manual for further details.