NAVIGATION SYSTEM > Black Screen (No Image Appears on Navigation and Audio Screen)

for Preparation Click here

INSPECTION PROCEDURE

1. Check that the display is not in "Screen OFF" mode.
   

   OK:

   The display setting is not in "Screen OFF" mode.
   

NG	CHANGE SCREEN TO "SCREEN ON" MODE

OK

1. Check that the screen color quality can be set.
   

   OK:

   Setting is possible.
   

NG	Go to step 3

OK
PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL

1. Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.
   

   HINT:

   1. A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may short circuit the screen.
      
   2. The appropriate cabin temperature is 20 to 30°C (68 to 86°F).
      

   OK:

   Condensation is not likely and temperature is not high or extremely low.
   

NG	SET CABIN TO APPROPRIATE TEMPERATURE

OK
RETURN TO THE ORIGINAL INSPECTION FLOW BECAUSE THE CHECK RESULT IS NORMAL