NAVIGATION SYSTEM > Panel Switches do not Function

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK PANEL SWITCH

  1. Check for foreign matter around the switches that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2.CHECK PANEL SWITCH (DISPLAY CHECK MODE)
I100041

  1. Enter the "Display Check" mode (Panel Switch Check) (Click here).

  1. Operate the abnormal switch and check if the switch name and status are correctly displayed.

    OK:
    The switch name and status are correctly displayed as operated.



NG
RETURN TO THE ORIGINAL INSPECTION FLOW BECAUSE THE CHECK RESULT IS NORMAL
OK

REPLACE MULTI-DISPLAY