NAVIGATION SYSTEM > Cursor or MAP Rotates when Vehicle Stopped

for Preparation Click here

INSPECTION PROCEDURE

1. Check with the customer if the vehicle has been turned by a turntable.
   

   OK:

   Vehicle has not been turned by turntable.
   

   HINT:

   If the vehicle is rotated on a turntable with the ignition switch on, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.

NG	TURN IGNITION SWITCH TO ON POSITION WHEN VEHICLE IS COMPLETELY STOPPED

OK
RETURN TO THE ORIGINAL INSPECTION FLOW BECAUSE THE CHECK RESULT IS NORMAL