NAVIGATION SYSTEM > Screen Flicker or Color Distortion

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISPLAY SETTING
I100192E02
I040263E01
I100194E02

  1. Enter the display adjustment screen by pressing the "DISP" switch.

  1. Reset display settings (contrast, brightness) and check that the screen appears normal.

  1. Press the "INFO" switch and then select "Screen Setting."

  1. Set the "Background Color" to "Green" (initial setting) and check if the display returns to normal.

    OK:
    Returns to normal.



NG
Go to step 2
OK

END 

2.CHECK CABIN

  1. Check that the cabin temperature is warmer than -20°C (-4.0°F).

    OK:
    Cabin is warmer than -20°C (-4.0°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3.CHECK COLOR BAR (DISPLAY CHECK MODE)


    I100037E05

  1. Enter the "Display Check" mode (Color Bar Check) (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE MULTI-DISPLAY
OK


4.CHECK NAVI COLOR BAR (NAVIGATION CHECK MODE)
I100050E04

  1. Enter the "Navigation Check" mode (NAVI Color Bar Check) (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE MULTI-DISPLAY
OK

RETURN TO THE ORIGINAL INSPECTION FLOW BECAUSE THE CHECK RESULT IS NORMAL