SHIFT LEVER POSITION SENSOR > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH


    G029274E02

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:


    		A-1 (D)
    		A-2 (N)
    		A-3 (P)
    		A-4 (R)
    		A-5 (MJ)
    		A-6 (FD)
    		A-7 (B)
    		A-9 (RV)
    P position
    		10 kΩ or higher
    		4.2 to 5.1 kΩ
    		Below 1 Ω
    		10 kΩ or higher
    		Below 1 Ω
    		10 kΩ or higher
    		10 kΩ or higher
    		10 kΩ or higher
    R position
    		10 kΩ or higher
    		4.2 to 5.1 kΩ
    		10 kΩ or higher
    		Below 1 Ω
    		Below 1 Ω
    		10 kΩ or higher
    		10 kΩ or higher
    		Below 1 Ω
    N position
    		10 kΩ or higher
    		Below 1 Ω
    		10 kΩ or higher
    		10 kΩ or higher
    		Below 1 Ω
    		10 kΩ or higher
    		10 kΩ or higher
    		10 kΩ or higher
    D position
    		Below 1 Ω
    		4.2 to 5.1 kΩ
    		10 kΩ or higher
    		10 kΩ or higher
    		Below 1 Ω
    		Below 1 Ω

    		10 kΩ or higher
    B position
    		10 kΩ or higher
    		4.2 to 5.1 kΩ
    		10 kΩ or higher
    		10 kΩ or higher
    		Below 1 Ω
    		Below 1 Ω
    		Below 1 Ω
    		10 kΩ or higher