PARKING BRAKE PEDAL (for RHD) > REASSEMBLY

for Preparation Click here



1. INSTALL PARKING BRAKE CABLE ASSY NO.1


    C108693E02

  1. Pass the parking brake No.1 cable assembly through the parking brake pedal and hold the cable with the clip.

  1. Pass the parking brake cable through the pedal guide. Temporarily tighten the wire adjusting No.1 nut and lock nut.

    HINT:
    Fully tighten the wire adjusting No.1 nut and lock nut when adjusting the parking brake pedal free play.

  1. Fully bend the parking brake pedal claw.



2. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    C108691

  1. Install the parking brake switch assembly with the screw.



3. INSTALL PARKING PEDAL PAD


    C110881E02

  1. Engage the claw and install the parking pedal pad on the parking brake pedal.