BRAKE PEDAL > DISASSEMBLY

for Preparation Click here



1. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY


    C116339E01

  1. Remove the 2 bolts and the brake pedal stroke sensor assembly.



2. REMOVE STOP LIGHT SWITCH ASSEMBLY

  1. Loosen the stop light switch lock nut and remove the stop light switch assembly from the brake pedal support assembly.



3. REMOVE BRAKE PEDAL


    C112519

  1. Remove the nut, the washer, the bolt and the brake pedal from the brake pedal support assembly.



4. REMOVE BRAKE PEDAL PAD


5. REMOVE STOP LIGHT SWITCH CUSHION


6. REMOVE BRAKE PEDAL SHAFT COLLAR


7. REMOVE BRAKE PEDAL BUSHING

  1. Remove the 2 brake pedal bushings from the brake pedal.



8. REMOVE BRAKE PEDAL SUPPORT


C112527

NOTICE:
Do not disassembly the upper support portion. If disassembled, be sure to replace it with new parts.