FRONT AIRBAG SENSOR > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.



3. REMOVE HEADLIGHT ASSEMBLY


    E068306

  1. Remove the 3 bolts.



    E068307

  1. Pull out the headlight assembly forward, then release the headlight bracket.



    E108643E01

  1. Disconnect each connector and separate the headlight assembly.

  1. Remove the clamp and headlight assembly.



4. REMOVE FRONT AIRBAG SENSOR LH


    H042704E01

  1. Remove the 2 bolts and the front airbag sensor LH.

  1. Disconnect the connector from the front airbag sensor LH.