SLIDING ROOF SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

    HINT:
    The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Sliding roof ECU 
Display (Item)
Default
Contents
Setting
OPEN/DOOR KEY
(Door key related OPEN)
ON
Function to manually open sliding roof linked with power window if holding driver side door key for 1.5 seconds or more to unlock position when engine switch is off
ON/OFF
CLOSE/DOOR KEY
(Door key related CLOSE)
ON
Function to manually close sliding roof linked with power window if holding driver side door key for 1.5 seconds or more to lock position when engine switch is off
ON/OFF
OPEN/WIRELESS
(Wireless key related OPEN)
ON
Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 1.5 seconds or more when engine switch is off
ON/OFF
DOOR KEY OPER
(Door key related operation)
SLIDE
Function to select tilt up or slide open of manual sliding roof operation linked with power window
Activate by holding driver side door key for 1.5 seconds or more to unlock position when engine switch is off
TILT/SLIDE
WIRELESS OPER
(Wireless key related operation)
SLIDE
Function to select tilt up or slide open of manual sliding roof operation linked with power window
Activate by pressing on transmitter UNLOCK switch for 1.5 seconds or more when engine switch is off
TILT/SLIDE