CENTER AIRBAG SENSOR ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

  1. Perform a diagnostic system check (Click here).



2. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

  1. Perform a diagnostic system check (Click here).



3. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)

  1. Replace the center airbag sensor assembly.

    CAUTION:
    Be sure to follow the correct removal and installation procedures.

    HINT:
    The center airbag sensor assembly should be replaced after any of the airbags has deployed, as it has been subjected to the impact.