MULTIPLEX COMMUNICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here

1. Connect the intelligent tester to the DLC3.
   

2. Turn the ignition switch on.
   

3. Read DTCs on the tester screen.
   

   HINT:

   Refer to the intelligent tester operator's manual for further details.

1. Connect the intelligent tester to the DLC3.
   

2. Turn the ignition switch on.
   

3. Erase the DTCs by following the prompts on the tester screen.
   

   HINT:

   Refer to the intelligent tester operator's manual for further details.