FRONT CIRCUIT BREAKER SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL CIRCUIT BREAKER SENSOR NO.1


    A108507

  1. Install the circuit breaker sensor No.1 with the 2 bolts to the w/ converter inverter assembly.

    Torque:
    8.0 N*m{ 82 kgf*cm , 70 in.*lbf }



    A109507

  1. Connect the connector to the circuit breaker sensor No.1.



2. INSTALL AIR CLEANER CAP W/INLET

  1. Install the air cleaner filter element to the air cleaner case.



    A108124

  1. Install the 2 bolts, 4 clamps and air cleaner cap w/ inlet.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



3. INSTALL ENGINE ROOM SIDE LH COVER


    A108719

  1. Fit the clips and install the engine room side LH cover.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


5. PERFORM INITIALIZATION
Some system need initialization when reconnecting the battery cable. (Click here)