POWER TILT AND POWER TELESCOPIC STEERING COLUMN > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


The intelligent tester can be used during steps 3, 6, 9and 12.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CHECK MULTIPLEX COMMUNICATION SYSTEM

      NEXT


      3.CHECK AND CLEAR DTCs

        NEXT


        4.PROBLEM SYMPTOM CONFIRMATION


          		.
          SYMPTOM DOES NOT OCCUR (GO TO STEP 6)

          		.
          SYMPTOM OCCURS (GO TO STEP 7)

          5.SYMPTOM SIMULATION

            NEXT


            6.DTC CHECK


              		.
              NORMAL SYSTEM CODE (GO TO STEP 8)

              		.
              TROUBLE CODE (GO TO STEP 9)

              7.PROBLEM SYMPTOMS TABLE


                		NEXT.
                GO TO STEP 10

                8.DTC CHART

                  NEXT


                  9.CIRCUIT INSPECTION

                    NEXT


                    10.IDENTIFICATION OF PROBLEM

                      NEXT


                      11.REPAIR

                        NEXT


                        12.CONFIRMATION TEST

                          NEXT

                          END