DTC    P0A1D-390    Hybrid Powertrain Control Module

DTC    P3004-133    Power Cable Malfunction

for Preparation Click here


DESCRIPTION

The HV control ECU monitors internal operations and detects a malfunction.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0A1D
390
Charge control error
HV control ECU
P3004
133
A high-voltage wiring system error signal is detected in the HV control ECU
HV control ECU

MONITOR DESCRIPTION

When HV control ECU detects that the HV battery has been charged and exceeds the entry limit, the HV control ECU will illuminate the MIL and set a DTC.

INSPECTION PROCEDURE

1.READ OUTPUT DTC (HV)

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to the ON position.

  1. Select the following menu items: Powertrain / Hybrid Control / DTC.

  1. Read output DTC. (Click here)

    Result:
    DTCs other than P0A1D-390 and P3004-133 are output.



YES
GO TO DTC CHART
NO

REPLACE HYBRID VEHICLE CONTROL ECU