AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items of the customer's request are applicable or not for the customized items, perform the customize operation.
  2. Be sure to record the current value before customizing.
  3. In case of performing the troubleshooting, pay attention as there is a possibility that the function is set to OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function" is displayed, check that the wireless operation is not set to OFF by customizing, then perform the troubleshooting.)


AIR CONDITIONER 
DISPLAY (ITEM)
DEFAULT
CONTENTS
SETTING
Shift Set Temperature
(Set Temp Shift)
NORMAL
To control with the shifted temperature against the display temperature.
+2C / +1C / NORMAL / -1C / -2C
Air Inlet Mode
(Air Inlet Mode)
AUTO
In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode.
MANUAL / AUTO
Compressor Mode
(Compressor Mode)
AUTO
Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF.
MANUAL / AUTO
Compressor / DEF Mode
(Comprs / DEF oper)
LINK
Function to turn the A/C ON automatically linking with the FRONT DEF button when the A/C is OFF.
NORMAL / LINK
Foot / DEF Auto Mode
(Foot/DEF Mode)
ON
Function to turn the air flow from FOOT/DEF to ON automatically when AUTO MODE is ON.
OFF / ON
Foot / DEF Auto Blow Up
(Auto Blow Up)
ON
Function to switch the blower level automatically when the defroster is ON.
OFF / ON
Ambient Temperature Shift
(Ambient Tmp Sft)
NORMAL
To control with the shifted ambient temperature against the display ambient temperature.
+3C / +2C / +1C / NORMAL / -1C / -2C / -3C