AIR CONDITIONING SYSTEM > SYSTEM DIAGRAM |
| Transmitter | Receiver | Line | Signal |
| A/C Amplifier | Integration Panel / Multi-Display (EMV) | BEAN/AVC-LAN | EMV-Indicator |
| EMV-Temp. Indicator | |||
| Ambient Temperature Data | |||
| Combination Meter | BEAN | Ambient Temperature Data | |
| Hybrid Vehicle Control ECU | BEAN/CAN | Cabin Temperature Signal | |
| Compressor Operation Signal | |||
| A/C Status Signal | |||
| Inverter Standby ON/OFF Demand Signal | |||
| Engine ON Demand Signal | |||
| Electric Fan Operation Signal | |||
| Target Compressor Speed | |||
| Mirror ECU | BEAN | Mirror Heater ON/OFF Signal | |
| Combination Meter | A/C Amplifier | BEAN | Vehicle Speed Signal |
| °C, °F Indicator Change Signal | |||
| Multiplex Network Body ECU | A/C Amplifier | BEAN | Diagnostic Tool Request Signal |
| Diagnostic Erase Signal | |||
| ECM (Built in Hybrid Vehicle Control ECU) | A/C Amplifier | BEAN/CAN | Engine Speed Signal (500ms) |
| Engine Coolant Temperature Signal | |||
| A/C Pressure Switch Signal | |||
| A/C Ambient Temperature Sensor Signal | |||
| Inlet Mode Switching Request Signal | |||
| Hybrid Vehicle Control ECU | A/C Amplifier | BEAN/CAN | A/C Water Pump Operation Signal |
| HV Indicator | |||
| A/C ECU Diagnosis Signal | |||
| Communication Status Signal (between A/C inverter and HV ECU) | |||
| A/C Inverter STB Open Circuit Signal | |||
| STB Condition Signal | |||
| A/C Motor Speed | |||
| Integration Panel / Multi-Display (EMV) | A/C Amplifier | BEAN/AVC-LAN | A/C Operation Signal |
| A/C Control Signal |
