BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR INLET SERVOMOTOR


    I035872

  1. Remove the 3 screws and air inlet servomotor.



2. REMOVE COOLING UNIT MOTOR WITH FAN SUB-ASSEMBLY


    I036003

  1. Remove the 3 screws and cooling unit motor with fan sub-assembly.



3. REMOVE BLOWER MOTOR CONTROL


    I037124

  1. Remove the 2 screws and blower motor control.



4. REMOVE CLEAN AIR FILTER


    E111241

  1. Release the 2 claws and remove the air filter sub-assembly.



    I037367

  1. Remove the air refiner element from the air filter cover plate.