REAR SHOCK ABSORBER > DISASSEMBLY

for Preparation Click here



1. FIX REAR SHOCK ABSORBER WITH COIL SPRING


    C113438E01

  1. As shown in the illustration, secure the rear shock absorber with coil spring in a vise using aluminum plates by closing the vise onto the double nutted bolt affixed to the bracket at the bottom of the absorber.



2. REMOVE REAR SHOCK ABSORBER


    C107465E01

  1. Using SST, compress the rear coil spring.

    SST
    09727-30021   (09727-00010, 09727-00021, 09727-00031)

    NOTICE:
    Do not use an impact wrench.

  1. Remove the nut, rear shock absorber collar and rear suspension support assembly.

  1. Remove the rear coil spring, rear spring bumper No.1, and rear coil spring insulator lower.