REAR STRUT ROD > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. SEPARATE PARKING BRAKE NO.3 CABLE ASSEMBLY


    C107671E02

  1. Remove the nut, and separate the parking brake cable assembly No.3.



3. REMOVE REAR STRUT ROD


    C107307E01

  1. Support the rear axle carrier with a jack.



    C107672E01

  1. Remove the bolt and nut, and disconnect the strut rod (front side).

    NOTICE:
    When removing the bolt, keep the nut from rotating.



    C107673E01

  1. Remove the bolt, nut and strut rod from the rear axle carrier.

    NOTICE:
    When removing the bolt, keep the nut from rotating.