REAR SUSPENSION NO. 2 ARM > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. REMOVE REAR SUSPENSION NO.2 ARM


    C107475E01

  1. Put matchmarks on the adjust cams and rear suspension member sub-assembly.

  1. Remove the nut, camber adjust cam and toe adjust cam, and disconnect the rear suspension arm No.2 (inner side).

    NOTICE:
    When removing the nut, keep the bolt from rotating.



    C109189

  1. Remove the bolt, nut and the rear suspension arm No.2 (outer side) from the rear axle carrier.

    NOTICE:
    When removing the bolt, keep the nut from rotating.