REAR STABILIZER BAR > INSTALLATION

for Preparation Click here



1. INSTALL REAR STABILIZER BAR


    C108220

  1. Install the rear stabilizer bracket.



    C108218E01

  1. Install the rear stabilizer bar with the bolt.

    Torque:
    54 N*m{ 551 kgf*cm , 40 ft.*lbf }



    C108219E01

  1. Install the rear stabilizer bar with the 2 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }



2. INSTALL REAR STABILIZER LINK ASSEMBLY LH


    C107477E01

  1. Install the rear stabilizer link assembly LH with the 2 nuts.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.



3. INSTALL REAR STABILIZER LINK ASSEMBLY RH

  1. Install the rear stabilizer link assembly RH with the 2 nuts.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.



4. INSTALL REAR WHEELS

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }