REAR STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEELS


2. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    C107477E01

  1. Remove the 2 nuts and rear stabilizer link assembly LH.

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.



3. REMOVE REAR STABILIZER LINK ASSEMBLY RH

  1. Remove the 2 nuts and rear stabilizer link assembly RH.

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.



4. REMOVE REAR STABILIZER BAR


    C108218E01

  1. Left side:
    Remove the bolt.



    C108219E01

  1. Right side:
    Remove the 2 bolts and rear stabilizer bar.