NAVIGATION SYSTEM > Cellular Phone Registration Failure, Phone Directory Transfer Failure

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CURRENT CONDITIONS

  1. Proceed to the next step according to the table below.

    RESULT:

    Conditions
    		Proceed To
    Another Bluetooth compatible cellular phone is present.
    		A
    Another Bluetooth compatible vehicle is present.
    		B
    None of the above
    		C



B
Go to step 3

C
Go to step 4
A


2.CHECK USING ANOTHER CELLULAR PHONE

  1. Check if the system functions using another Bluetooth compatible cellular phone.

    HINT:
    1. Confirm that either the same or a different version of another Bluetooth compatible cellular phone complies with the system.
    2. Depending on the version, some Bluetooth compatible cellular phones cannot be used.

    OK:
    The system functions.



NG
REPLACE MULTI-DISPLAY
OK

USE A BLUETOOTH COMPATIBLE CELLULAR PHONE 

3.CHECK USING ANOTHER BLUETOOTH COMPATIBLE VEHICLE

  1. Register the cellular phone with another vehicle and check if the system functions normally.

    HINT:
    Depending on the version, some Bluetooth compatible cellular phones cannot be used.

    OK:
    The system functions.



OK
REPLACE MULTI-DISPLAY
NG

USE A BLUETOOTH COMPATIBLE CELLULAR PHONE 

4.CHECK CELLULAR PHONE

  1. Check if the cellular phone is Bluetooth compatible.

    HINT:
    Some versions of Bluetooth compatible cellular phones may not function.

    OK:
    The phone is Bluetooth compatible.



NG
USE A BLUETOOTH COMPATIBLE CELLULAR PHONE
OK


5.CHECK CELLULAR PHONE

  1. Check if a call can be made from the cellular phone.

    HINT:
    When the battery is low, registration or directory transfer cannot be done.

    OK:
    A call can be made from the cellular phone.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK

REPLACE MULTI-DISPLAY