FRONT SEAT CUSHION HEATER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER LH


    B068349E01

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-1 - B-1
    		Seat heater temp. below 25 to 35°C (77 to 95°F)
    		8,000 to 8,400 Ω
    A-1 - B-1
    		Seat heater temp. 46 to 54°C (115 to 129°F)
    		3,900 to 4,300 Ω
    A-2 - A-3
    		Seat heater temp. below 25 to 35°C (77 to 95°F)
    		Below 1 Ω
    A-2 - A-3
    		Seat heater temp. 46 to 54°C (115 to 129°F)
    		10 kΩ or higher (thermostat OFF)
    A-4 - B-2
    		Always
    		Below 1 Ω

    If the result is not as specified, replace the front seat cushion heater.



2. INSPECT FRONT SEAT CUSHION HEATER RH


    B068349E01

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-1 - B-1
    		Seat heater temp. below 25 to 35°C (77 to 95°F)
    		8,000 to 8,400 Ω
    A-1 - B-1
    		Seat heater temp. 46 to 54°C (115 to 129°F)
    		3,900 to 4,300 Ω
    A-2 - A-3
    		Seat heater temp. below 25 to 35°C (77 to 95°F)
    		Below 1 Ω
    A-2 - A-3
    		Seat heater temp. 46 to 54°C (115 to 129°F)
    		10 kΩ or higher (thermostat OFF)
    A-4 - B-2
    		Always
    		Below 1 Ω

    If the result is not as specified, replace the front seat cushion heater.