HEADLIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER STAY CENTER


    B115757

  1. Remove the 5 clips and front bumper stay center.



2. REMOVE FRONT BUMPER ASSEMBLY


    B110043

  1. Using a hexagon 4 mm wrench, remove the hexagon screw.



    B115758E01

  1. Put protective tape under the front fender.

  1. Remove the 6 screws and 2 bolts.

  1. Release the 6 claws and front bumper assembly.

  1. w/ headlight washer:

    1. Remove the washer hose clip.

  1. Disconnect the fog light connectors.



3. REMOVE HEADLIGHT ASSEMBLY


    E068306

  1. Remove the 3 bolts.



    E068307

  1. Pull out the headlight assembly forward, then release the headlight bracket.



    E108643E01

  1. Disconnect each connector and separate the headlight assembly.

  1. Remove the clamp and headlight assembly.



4. REMOVE FRONT NO.2 BUMPER SIDE SUPPORT


    E069151

  1. Using needle nose pliers, release the 2 claws and remove the front No.2 bumper side support from the headlight assembly.