FOG LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER STAY CENTER


    B115757

  1. Remove the 5 clips and front bumper stay center.



2. REMOVE FRONT BUMPER ASSEMBLY


    B110043

  1. Using a hexagon 4 mm wrench, remove the hexagon screw.



    B115758E01

  1. Put protective tape under the front fender.

  1. Remove the 6 screws and 2 bolts.

  1. Release the 6 claws and front bumper assembly.

  1. w/ headlight washer:

    1. Remove the washer hose clip.

  1. Disconnect the fog light connectors.



3. REMOVE FOG LIGHT PROTECTOR


    B110042E01

  1. Release the 2 claws and fog light protector LH.



4. REMOVE FOG LIGHT ASSEMBLY


    E108649E01

  1. Disengage the 2 claws and 2 pins and remove the fog light assembly.