LICENSE PLATE LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL LICENSE PLATE LIGHT ASSEMBLY

  1. Install the license plate light assembly with the 2 claws.

  1. Connect the connector.



2. INSTALL BACK DOOR GARNISH


  1. Install the 5 bolts, clip and garnish.


    B068610E01

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf }

  1. Connect the back door opener switch connector.



3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY UPPER