LICENSE PLATE LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER


    B109548E01

  1. Disengage the 10 clips and remove the back door trim panel assembly upper.



2. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    B109550E01

  1. Disengage the 8 clips and remove the back door trim panel assembly.



3. REMOVE BACK DOOR GARNISH

  1. Disengage the back door opener switch connector.



  1. Remove the 5 bolts, clip and garnish.


    B068610E01



4. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    E068324E01

  1. Disengage the 2 claws and separate the license plate light assembly as shown in the illustration.

  1. Disconnect the connector and remove the license plate light assembly.