HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door)


    B109547E01

  1. Disengage the 2 claws and the 7 clips, and remove the back window panel trim upper.



2. REMOVE BACK DOOR TRIM BOARD (w/ Power Back Door)


    B109546E02

  1. Disengage the 3 claws and remove the back door trim board.



3. REMOVE BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door)


    B109549E03

  1. Disengage the 2 claws and the 7 clips, and remove the back window panel trim upper.



4. REMOVE REAR SPOILER


    B110039

  1. Disconnect the center stop light connector.

  1. Remove the 2 grommets and 5 bolts.



    B067937E01

  1. Remove the 3 clips and rear spoiler sub-assembly.



5. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY


    I037769E01

  1. Install the strap to the connector of the high mounted stop light assembly.

  1. Remove the 2 screws.

  1. Pass the connector through the inside of the rear spoiler and remove the high mounted stop light assembly.

    HINT:
    Leave the strap inside the rear spoiler.