REAR FOG LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE DECK FLOOR BOX REAR


    B110023

  1. Using a clip remover, remove the 2 clips and deck floor box rear.



2. REMOVE REAR FLOOR FINISH PLATE


    B111780

  1. Using a clip remover, remove the 2 clips.

  1. Disengage the 2 claws and 6 clips, and remove the rear floor finish plate.



3. REMOVE REAR BUMPER STOPPER UPPER


    B109338

  1. Remove the 2 screws.

  1. Using a screwdriver, remove the rear bumper stopper upper.



4. REMOVE REAR BUMPER ASSEMBLY


    B109327E01

  1. Put protective tape under the quarter panel.

  1. Remove the 2 clips and 4 nuts.

  1. Remove the 8 screws.

  1. Release the 10 claws and the rear bumper assembly.

  1. Disconnect the rear reflector connectors.



5. REMOVE REAR FOG LIGHT ASSEMBLY


    E068326E01

  1. Remove the screw.

  1. Disengage the claw and remove the rear fog light assembly.