REAR WIPER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE REAR WIPER ARM COVER

  1. Remove rear wiper arm cover.



2. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

  1. Remove the nut, rear wiper arm and blade assembly.



3. REMOVE REAR WIPER SHAFT COVER


    E108668

  1. Remove the rear wiper shaft cover.



4. REMOVE REAR NO.1 WIPER LINK PIVOT NUT


    E108667

  1. Using the socket wrench 27 mm (1.06 in.), remove the rear No.1 wiper link pivot nut.



5. REMOVE REAR NO.1 WIPER LINK PIVOT WASHER


    E108669

  1. Remove the rear No.1 wiper link pivot washer.



6. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER


    B109548E01

  1. Disengage the 10 clips and remove the back door trim panel assembly upper.



7. REMOVE REAR WIPER MOTOR


    E068272

  1. Disconnect the connector.

  1. Remove the 3 bolts and the rear wiper motor.