REAR WIPER RUBBER > INSTALLATION

for Preparation Click here



1. INSTALL REAR WIPER RUBBER


    E059361E02

  1. Install the rear wiper rubber to the 2 rear wiper rubber backing plates.

    NOTICE:
    Install the rear wiper rubber backing plates in the correct direction.



    E061233

  1. Insert the rear wiper rubber from the claw position of the middle of the rear wiper blade assembly to the end.



    E060706

  1. After passing the rear wiper rubber through the rear end side claw, allow it to stick out from the rear end stopper and slide it through the front tip side claw.



2. INSTALL REAR WIPER BLADE ASSEMBLY