WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WIPER SWITCH

  1. Install the wiper switch with the claw.

  1. Connect the connector.



2. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)


    C111431

  1. Engage the claw to install the steering column cover upper.



    C111471

  1. Engage the 2 claws to install the steering column cover lower.

    NOTICE:
    Do not damage the tilt and telescopic switch.

  1. Install the 3 screws.



3. INSTALL STEERING COLUMN COVER (for Manual Tilt)


    C111431

  1. Engage the claw to install the steering column cover upper.



    C111428E01

  1. Engage the 2 claws to install the steering column cover lower.

  1. Install the 3 screws.

  1. Install the steering column cover No.2.