WIPER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN COVER (for Manual Tilt)


    C111428E01

  1. Remove the steering column cover lower No.2.

  1. Remove the 3 screws.

  1. Disengage the 2 claws and remove the steering column cover lower.



    C111431

  1. Disengage the claw and remove the steering column cover upper.



2. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic)


    C111471

  1. Remove the 3 screws.

  1. Disengage the 2 claws and remove the steering column cover lower.

    NOTICE:
    Do not damage the tilt and telescopic switch.



    C111431

  1. Disengage the claw and remove the steering column cover upper.



3. REMOVE WIPER SWITCH


    I037265E01

  1. Disconnect the connector.

  1. Using a screwdriver wrapped with protective tape, disengage the claw and remove the wiper switch.

    NOTICE:
    If the claw is pushed with excessive force, it may be broken.