WIPER ECU > INSTALLATION

for Preparation Click here



1. INSTALL WIPER ECU


    E110457

  1. Install the wiper ECU with the screw.

  1. Connect the connector.



2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    B108513E03

  1. Connect the connectors.

  1. Install the 2 bolts <A>, the 2 screws <C>, and the glove compartment door assembly.



3. INSTALL NO.2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B112171

  1. Connect the connectors.

  1. Engage the 3 claws and install the instrument panel No.2 under cover sub-assembly.



4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:
Use the same procedures for the RH side and the LH side.



5. INSTALL FRONT DOOR SCUFF PLATE RH


    B111782

  1. Connect the connector. (w/ illumination scuff plate)

  1. Engage the 6 claws and 4 clips, and install the front door scuff plate.



6. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL


7. PERFORM INITIALIZATION
(Click here)