FUEL LID OPENER MOTOR ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


2. INSTALL FUEL LID OPENER MOTOR ASSEMBLY

  1. Install the lock.

  1. Install the fuel lid opener motor assembly with the nut.

  1. Connect the connector.



3. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH


    B111796

  1. Engage the 7 clips and install the roof side garnish assembly inner.



    B111795

  1. Install the 3 clips.

  1. Install the 3 bolts and tonneau cover holder cap.



    B111797

  1. Engage the 4 claws and install the seat belt bezel.



4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    B111793

  1. Engage the 2 clips and install the deck trim side panel assembly.

  1. Install the 4 clips.



5. INSTALL ROPE HOOK

  1. Install the 2 rope hooks with the 2 bolts.

    Torque:
    8.0 N*m{ 80 kgf*cm , 71 in.*lbf }

    HINT:
    Use the same procedure to install the other side.



6. INSTALL REAR FLOOR FINISH SIDE PLATE LH


    B111792

  1. Engage the 2 clips and install the rear floor finish side plate.

  1. Install the clip.



7. INSTALL REAR SEAT SIDE COVER LH


    B111791

  1. Engage the 4 clips and install the rear seat side cover.

  1. Install the 3 clips.



8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH


9. INSTALL REAR DOOR SCUFF PLATE LH


    B111783

  1. Connect the connector. (w/ illumination scuff plate)

  1. Engage the 4 claws and 2 clips, and install the rear door scuff plate.



10. INSTALL DECK SIDE TRIM BOX LH


    B111781

  1. Install the deck side trim box with the 2 clips.



11. INSTALL REAR FLOOR FINISH PLATE


    B110477

  1. Engage the 2 claws and 6 clips, and install the rear floor finish plate.

  1. Install the 2 clips.



12. INSTALL DECK SIDE TRIM COVER LH


    B111808

  1. Engage the 5 claws and install the deck side trim cover.



13. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY


    B110025

  1. Install the deck No.3 board sub-assembly with the 2 bolts and 2 nuts.



14. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY


    B110024

  1. Install the deck No.2 board sub-assembly with the 4 bolts and 2 nuts.



15. INSTALL DECK FLOOR BOX REAR


    B110023

  1. Install the deck floor box rear with the 2 clips.



16. INSTALL DECK FLOOR BOX FRONT


    B110022

  1. Install the deck floor box front with the 2 clips.



17. INSTALL DECK BOARD SUB-ASSEMBLY


    B110455

  1. Install the deck board sub-assembly with the 2 bolt.

  1. Engage the 5 clips.



18. INSTALL TONNEAU COVER ASSEMBLY