POWER MIRROR CONTROL SYSTEM (w/ Memory) > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
  1. Use this procedure to troubleshoot the power mirror control system.
  2. The intelligent tester should be used in steps 3 and 5.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK

      NEXT


      3.CHECK COMMUNICATION FUNCTION OF BODY MULTIPLEX COMMUNICATION SYSTEM (BEAN)

        HINT:
        Click here

      1. Use the intelligent tester to check for normal function of the multiplex communication system.

        1. (ECU unconnected, communication line malfunctioning) If no code are output, proceed to A.

        2. (ECU unconnected, communication line malfunctioning) If any codes are output, proceed to B.



      		B.
      GO TO MULTIPLEX COMMUNICATION SYSTEM
      A


      4.PROBLEM SYMPTOMS TABLE

        HINT:
        Click here


      NEXT


      5.OVERALL ANALYSIS AND TROUBLESHOOTING

      1. Data list/Active test

        HINT:
        Click here

      2. Circuit inspection

      3. Terminals of ECU

        HINT:
        Click here


      NEXT


      6.ADJUST, REPAIR OR REPLACE

        NEXT

        END