CONDENSER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CONDENSER

  1. If the fins of the cooler condenser assembly are dirty, clean them with water and dry them with compressed air.

    NOTICE:
    Do not damage the fins of the cooler condenser assembly.

  1. If the fins of the cooler condenser assembly are bent, straighten them using a screwdriver or pliers.



2. INSPECT CONDENSER FOR LEAKAGE OF REFRIGERANT

  1. Using a halogen leak detector, check the pipe joints for gas leakage.

  1. If a gas leakage is detected in a joint, check the torque of the joint.