METER / GAUGE SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here




1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CHECK BODY MULTIPLEX COMMUNICATION SYSTEM

      1. Check for DTC output.

        HINT:
        Click here.



      		.
      MULTIPLEX DTC OUTPUTS (PROCEED TO "BODY MULTIPLEX COMMUNICATION SYSTEM")

      		.
      NO MULTIPLEX DTC (GO TO STEP 4)

      4.CHECK CAN COMMUNICATION SYSTEM

      1. Check for DTC output.

        2. HINT:
        Click here.



      		.
      CAN DTC OUTPUTS (PROCEED TO "CAN COMMUNICATION SYSTEM"

      		.
      NO CAN DTC (GO TO STEP 5)

      5.PROBLEM SYMPTOM CONFIRMATION

        NEXT


        6.PROBLEM SYMPTOMS TABLE

          HINT:
          Click here.


        NEXT


        7.CIRCUIT INSPECTION

          NEXT


          8.REPAIR OR REPLACE

            NEXT


            9.CONFIRMATION TEST

              NEXT

              END